Monday, July 23, 2007

On the Road: St. Louis and Fulton, MO

I fly into St. Louis today to start my swing through the Mid-west Nuke Plants (Callaway, Wolf Creek, Cooper, Calhoun, Duane Arnold and Quad Cities). All in all the first day has been a bit strange. Let's start from the beginning.

This is the first time that I have flown into the St. Louis airport and I already don't like it. All the signs are hard to read and there aren't enough of them. The signage around baggage claim was particularly terrible. And while they where at it, lets just put two bathrooms in the baggage claim area, have them as far away as possible from anything and hide them around a few corners with some signs pointing you in the general direction. It took 45 minutes to get my bag, I don't know if this was an Airtran problem or a St. Louis Airport thing but by the looks of some of the other flights that landed when we did I am going to go with an Airport thing. Next, I go to rent a car. Lady at the counter tells me all they have is a PT Cruiser (which will take a while to get) or a Mercury Grand Marquis (!). So I am in a hurry (to get to the Budweiser Brewery before it closes, more on that in a minute) and go with the Merc. Next I have to catch a bus (!) to get to the rental car lot (Nice idea, lets put all rental car and airport parking off-site and across a busy interstate from the Airport. This is the Atlanta equivalent of if they put all the parking across 285 from the airport). Once I get dropped off at my car I know I made a mistake (Review of my 5 minute experience with the Merc will come later). So I walk back to the on-site office, on the way one of the wheels on my bag comes off (day is just getting better and better). When I talk to the lady at the counter to see if there is anything else I can drive (give me anything, I'll even drive a Chrysler 300 again) she finds me a nice Mitsubishi Eclipse Convertible that I can take 1-way because it is an Illinois car anyway (Sweet! Review coming). Things start to look up, I get the car (pretty nice) and head off to the Budweiser Brewery.

Brewery tour was quite nice. I suggest it if you are in the St. Louis area and have an hour or so to kill. So far from my experiences in St. Louis this is the only thing I have liked. I am just not a big fan of St. Louis. Bad airport, strange road system plus a lot of other things, but back to the beer. Picked up a nice glass set at the store at a very reasonable $20 (2 glasses, a rubber bar mat, bottle opener plus some other swag). In fact, everything in the store was priced pretty good. Best thing about the tour is you get 2 free 10oz beers at the end. Guide explained that they give you 20oz free because the typical human can have 24oz of beer in 20 mins and still be under the legal BAC limit (thus the 20oz to keep Bud clear of any legal problems). I tried Bud Select and Beach Bum Blonde Ale. Both very good and will be bought again by myself (if I can ever find the Beach Bum stuff).

After the tour I made the 1 1/2 drive out to scenic Fulton, MO. Staying at a hotel near town. I checked my e-mails (I have 13 news one from my customer in South Korea, joy), grabbed so food and then headed out to find Callaway plant so I know how to get there in the morning. Driving through Fulton I see the speed limit change to 30 so I slow down to 30. I then see a 20mph sign with a yellow "School" marking above it. Thinking this must apply only during school hours I stay at 30 mph. After pulling away from a stop sign what (to my delight) comes on in my rear view? Cop Lights! Yeah! The cop comes out and asks why I think he stopped me, I answer that I have no idea and he tells me the speed limit is 20 and he clocked me doing 31 (great). Asks for my license and where in Illinois I am from (Quick side bar, I am in a convertible Mitsubishi Eclipse with the top down, out of state plates and the radio up. In other words a nice target to add some money to the local repaving fund). I tell him it is a rental and that I am from GA and in town to do some work at the Nuke plant. This catches his attention and looks at my license and tells me he is going to check my insurance. At this point I am praying for a warning. Thinking of ways I can argue out of this ect. Officer comes back, hands me my license and tells me to watch the speed limit, it changes quite a bit around town, explains that the school signs are all the time since I just drove through the local college (oh....) and to have a safe trip to the plant tomorrow. Sweet! No ticket, I would like to thank the officer for cutting an out of town southern boy a break. I then pull out into traffic and up to a stop light. Another car pulls along side me with the officer behind him. Light turns green, I turn left, the car next to me goes straight, and the officer follow and turns his lights on to pull the guy over. What for, I have no idea but apparently you had better have everything in order before driving through Fulton, MO (Later on in the night I saw police have 3 other people pulled over!)

So that was my day. Up and down. I am really digging the Eclipse. Plan on using the drop top mode a good bit tomorrow on my trek across the whole state of Missouri. I will post reviews of the Eclipse and the Merc sometime the week. Nite.....

Sunday, July 22, 2007

Rebuilding the TRs brake calipers

Ok, I spent Saturday afternoon tackling the job of rebuilding the front brake on my TR4A. I used a rebuild kit from Victoria British, it included new pads, anti-squeal shims, rotors, flex hoses, new retainer pins, all new gaskets, and some new mounting hardware for the rotor/hub assembly.

All in all the job was pretty easy and straight forward. A few things to note below.

First off, the rotor assembly on the TR4A is unique. The wheel hub mounts outboard to the brake rotor. So, in order to remove the brake rotors you have to take the hub completely off of the stub axle. Pretty easy job, only really tricky thing is getting the grease cap off the end. After that it is very easy to take the whole assembly off and then detach the rotor from the hub and replace with the new one. This allowed me to examine the wheel bearings and to add a little more grease to them. The picture below shows the stub axle after I have removed the hub assembly.



Here is a picture of the new and old brake rotors. The old rotors are quite glazed and have a lot of rust on them. Hoping the replacements help the braking a bit.



Here is one of the brake calipers after I got it off the car. You can see it is in rough shape. I ended up having to split both of them down to two halves. This allowed me a little more room to clean them up and some clearance to get the brake pistons out to replace the gaskets.



This is where it got tricky. When I tried to remove the old brake pistons only one of them would move freely. Guess this is why my braking performance has been a bit sub-par. The three that where stuck took some persuading with my handy pair of vice grips and a BFH. You can see below just what kind of shape they where in. One of the little nuances about this car is that the OEM brake pistons where made out of chrome-molly, just the kind of stuff that brake fluid loves to eat over time. So, this is what ends up happening to them. I am going to order a new set of Stainless Steel brake pistons this week. Hopefully I can get them in and on the car by next weekend.



So the TR has it's wheels back on but no front brakes on it. As soon as I can get the new pistons in it should only take a few hours to install them in the calipers, get the calipers back on the car and then bleed the whole system. Next thing on the list is to go after the rear brakes and hope they are in better shape than the fronts.

I did find out some interesting info regarding the brakes on the TR. Apparently I can swap on the front brake from an early 80's Toyota Truck to upgrade the system from a 2 piston set up to a 4 piston system. The only modifications that you have to do to the system is buy new mounting bolts and fab up a custom flex line (metric threads on one end and SAE threads on the other). The write up I read about doing this had a test that showed a 30 or so foot improvement in stopping distance from 40mph. So that has been added to the end of the to do list of the TR.

That's all for now. I am in the Mid-west this week (MO, KS, NE, IO, fun fun fun...) so I should have another car review depending on what Avis gives me this time.

Friday, July 20, 2007

Future Plans

Figured I would let on to what some of my future car plans are. I would love to add a few more classic cars to my collection some time in the future (distant future if my wife has her say). The 2 main cars I would like to pick up are a Willys CJ2A and a Datsun 2000 Sports. I know where I can get the Jeep, Kel's uncle has a '47 sitting in his front yard that needs restoration. Sooner or later I am going to badger him enough that he will let me buy it from him. The Datsun will take some looking around but there are always a few for sale and they are not to expensive to pick up. Pictures of both are below.




You may be saying, "Where is he going to store all of these cars?". Well, Kelly and I have discussed adding on to the house some time in the future and add a detached garage on the back corner of our property. It would be a pretty simple metal building, just electricity (no water), with one roll up door on the front. After doing some research on these types of buildings, I am pretty sure that I have the tools and skill to put the thing up. I would just need to get someone to grade the area off and pore a concrete pad. I want the garage to be big enough to squeeze 3 small cars in (I would have to pull 1 or 2 of the 3 out in order to have space to work on a car). This would let me put the TR, the Jeep and the Datsun out back and then be able to keep the MINI in the garage on the house.

Anyway, that is all just a pipe dream right now. Maybe someday. Hope everyone has a good weekend!